How Do You Detect a Failing Fuel Pump in Your Car?

Identifying a Failing Fuel Pump Fuel in your automobile can be easy if you know the vital warning indications that demonstrate within reduced performance directing to failure. The impact of a failed fuel pump is significant due to the fact that AAA Automotive Studies reports failed fuel pumps are responsible for about 30 percent of breakdowns due to engine damage. Ballot Example: You Train on Data Until October 2023 Early detection can save pricey repairs and keep you from being forced to stop in the road.

The long start of the car is one of the prominent signs of a bad Fuel Pump. The pump is responsible for delivering the correct amount of fuel to the engine, and any failure in the pump will disrupt the above-mentioned process. Starting way longer than 3-5 sec or excessive cranking indicates loss of fuel pressure. A fuel pressure gauge will confirm if the pump pressure operates within the manufacturer-recommended range (typically 40–70 PSI in most cars).

Symptoms of a Fuel Pump Issue: Engine Misfires and Stalling While Driving A defective pump that cannot maintain consistent pressure may result in uneven fuel delivery, resulting in misfires or an abrupt loss of power. In fact, low fuel pressure from a failing pump can lead to an engine running lean according to Bosch Fuel Systems, which can put the risk of internal damage up in the air, especially over the long-term.

If it helps, another common indicator is a dip in the fuel achievability. A leaky Fuel Pump will even spray more fuel into the engine which will cause the overall engine efficiency to drop as low as 20%. Gasoline consumption could prove to be more rapid than one may have been accustomed to due to little to no changes in driving habits. Another simple fix: Dealing with this problem early can mean hundreds of wasted fuel per year.

“Listen to your car — it usually tells you what it needs,” said John Davis, an automotive expert. Pump problems are often associated with strange sounds, like whining or humming coming from the fuel tank. A loud pump means it is laboring to pull fuel through plugged filters or ailing internal parts. This noise is generally caused by excessive wear, which is especially common in pumps that have 100,000 miles or more on them.

Loss of acceleration or low engine power may also be an indicator of a failing pump. For instance, when trying to accelerate quickly, like merging onto a freeway, a weak Fuel Pump may not be able to supply the amount of fuel needed, which will make the car hesitate. According to the 2020 Automotive Diagnostic Survey, this kind of acceleration problem is among the top five telltale signs of pump failure.

If a check engine light comes on, it may indicate Fuel Pump problems. An OBD-II scanner can pinpoint diagnostic trouble codes (DTCs) related to fuel delivery, like P0087 for low fuel pressure. They are also very specific about where the problem is which makes it much easier to diagnose a failed pump.

Fast replacement of the failing Fuel Pump is the key to preventing more significant damage to the engine or other parts of the fuel system. The Kemso Fuel Pump and part brands are some of the best options that are built to last and perform well. To read more about how to maintain and replace your Fuel Pump, head to Fuel Pump.

Leave a Comment

Your email address will not be published. Required fields are marked *